This version (28 Apr 2016 15:16) was approved by rgetz.The Previously approved version (17 Feb 2016 14:13) is available.Diff

AD-FMCDAQ2-EBZ User Guide

The AD-FMCDAQ2-EBZ is an FMC board for the high speed DAC AD9144 & ADC AD9680. While the complete chip level design package can be found on the ADI product pages of these converters, information on the card, and how to use it, the design package that surrounds it, and the software which can make it work, can be found here.

The purpose of the AD-FMCDAQ2-EBZ is a data acquisition platform that connects the analog world using FMC to the FPGA.

The AD-FMCDAQ2-EBZ board was architected to handle some arbitrary sample rates. However - changing sample rates changes the JESD204B line rates. Xilinx does not support dynamic JESD204B rates today. Using the Xilinx IP without modification – you need to set the JESD204B rates at HDL compile time. It’s not a run time option (yet).

As Xilinx becomes more run time dynamic – so can this board. Until then, you will need a different bitstream for every sample rate.

  1. Hardware (including schematics)

Videos

The Adobe Flash Plugin is needed to display this content.

All the boards described on this page include ESD (electrostatic discharge) sensitive devices. Electrostatic charges as high as 4000V readily accumulate on the human body and test equipment and can discharge without detection.

Although the boards feature ESD protection circuitry, permanent damage may occur on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.

resources/eval/user-guides/ad-fmcdaq2-ebz.txt · Last modified: 28 Apr 2016 15:16 by rgetz

  沪ICP备09046653号