This is an old revision of the document!
ADALM-PLUTO for End Users
Everyone using Pluto should read these pages. They will demonstrate how to interact with RF signals with MATLAB, Simulink, GNU Radio or custom C, C++, C#, or Python code on a host (x86) or embedded (Raspberry Pi, Beaglebone, 96boards.org, etc.) platform over USB. As you can see, we have lots of examples with MATLAB and Simulink, as we find that a very powerful environment, and a path to a releasable radio (you can take your algorithms, and easily embed them into a custom product).
Contents
Make sure all things are in ./users
-
-
-
-
-
-
-
-
-
Intro to the Software. Installing Device Drivers on:
-
-
-
Upgrading the the ADALM-PLUTO
Firmware .
-
-
using more than one the ADALM-PLUTO on the same PC.
Once the driver are configured and set up, you can interact with the
ADALM-PLUTO Active Learning Module from:
-
example 1
Using Pluto with the
gqrx, an open source software defined radio receiver (SDR) powered by the
GNU Radio and the Qt graphical toolkit.
-
example 1
-
example 2
-
-
Using Pluto with
SDRangel. SDRangel is an Open Source Qt5 / OpenGL 3.0+ SDR and signal analyzer frontend to various hardware.
Using Pluto with SDR#. The PlutoSDR frontend for SDRsharp can be found here:
sdrsharp-plutosdr
-