Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий
This version (26 Mar 2021 17:18) was approved by Antoniu Miclaus.The Previously approved version (14 Nov 2018 14:35) is available.Diff

This is an old revision of the document!

This page has been moved to ADALM2000 for End Users

ADALM2000 for End Users

Contents

Make sure all things are in ./users

  1. Introduction to the Hardware
    1. What's with the name? ADALM2000?
    2. Understanding the Internals
  2. Quick Start
  3. Intro to the Software. Installing Device Drivers on:
    1. Windows
    2. Linux
    3. MAC
  4. Upgrading the the ADALM2000 Firmware .
  5. Once the driver are configured and set up, you can interact with the ADALM2000 Active Learning Module from:
    1. Scopy
      1. Complete user guides on how to use each Scopy instrument:
        1. Oscilloscope
        2. Spectrum Analyzer
        3. Network Analyzer
        4. Signal Generator
        5. Logic Analyzer
        6. Pattern Generator
        7. Digital IO
        8. Voltmeter
        9. Power Supply
    2. ALICE Active Learning Interface (for) Circuits (and) Electronics for M2K:
  6. After everything is up and running, you can start building your own circuits using the following kit:
  7. A list of applications and lab activities developed with ADALM2000 can found here:
/srv/wiki.analog.com/data/pages/university/tools/adalm2000/users.txt · Last modified: 26 Mar 2021 17:19 by Antoniu Miclaus

Page Tools