The most recent version of this page is a draft.
This version (10 Feb 2021 12:46) was approved by Sanjeeva Reddy.
This version (10 Feb 2021 12:46) was approved by Sanjeeva Reddy.This is an old revision of the document!
Table of Contents
Click here to return to the Multiplexers and Demultiplexers page
Cross Mux
Description
The Cross Mux block allows route an input to one of selected output pins. The output for each input is selected based on the numeric value on the control.
Targets Supported
| Name | ADSP-214xx(Sample) | ADSP-214xx(Block) | ADSP-215xx/ADSP-SC5xx(Sample) | ADSP-215xx/ADSP-SC5xx(Block) |
|---|---|---|---|---|
| Mono | No | Yes | No | Yes |
Pins
Input
| Name | Type | Description |
|---|---|---|
| Input0 | Audio | Input Channel 0 |
Output
| Name | Type | Description |
|---|---|---|
| Output0 | Audio | Output channel 0 |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| Index_Channel0 | 0 | 0 to number of outputs | Selects the output channel to route the input |
| NumInputs | 1 | 1 to 20 | Number of input channels. Change in this value requires re-compilation |
| NumOuputs | 1 | 1 to 20 | Number of input channels. Change in this value requires re-compilation |
Here,
- Red - Input channel number
DSP Parameters
| Parameter Name | Description | ADSP-214xx/SC5xx/215xx |
|---|---|---|
| Index_Channel0 | Selects the output channel to route the input | Float |
Here,
- Red - Input channel number
/srv/wiki.analog.com/data/pages/resources/tools-software/sigmastudiov2/modules/muxesanddemuxes/crossmux.txt · Last modified: 05 Apr 2021 15:26 by John Joseph