Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.
[[resources/tools-software/sigmastudiov2/modules/muxesanddemuxes|Click here to return to the Multiplexers and Demultiplexers page]]
====== Cross Mux ======
\\
{{:resources:tools-software:sigmastudiov2:modules:muxesanddemuxes:crossmux.png}}
===== Description =====
The Cross Mux block allows route an input to one of selected output pins. The output for each input is selected based on the numeric value on the control.
\\
===== Targets Supported =====
^ Name            ^ ADSP-214xx ^ ADSP-215xx/SC5xx ^ ADAU145x/146x ^
| ------------------------------ | -------------------- | -------------------------------- | ---------------------------- |
| Cross Mux   | B          | B                | NA              |
\\
===== Pins =====
==== Input ====
^ Name        ^ Type    ^ Description ^
| ---------------------- | -------------- | ---------------------- |
|Input<fc #ff0000>X</fc>       | Audio   |Input Channel X |
==== Output ====
^ Name        ^ Type    ^ Description ^
| ---------------------- | -------------- | ---------------------- |
|Output<fc #ff0000>X</fc> | Audio |Output Channel X |
Note:
     * <fc #ff0000>X</fc> - Channel Index 
\\
===== Configurable Parameters =====
^ GUI Parameter        ^ Default Value ^ Range     ^ Function Description ^
| ---------------------------------------- | ---------------------- | ------------------------------ | ---------------------------------------- |
| Index_Channel<fc #ff0000>X</fc> | 0 | 0 to NumOuputs-1 | Selects the output channel to route the input |
| NumInputs | 1 | 1 to 20 |Number of input channels. Change in this value requires re-compilation |
| NumOuputs | 1 | 1 to 20 |Number of input channels. Change in this value requires re-compilation |
Note:    
     * <fc #ff0000>X</fc> - Channel Index
\\
===== DSP Parameters =====
^ Parameter Name       ^ Description ^ ADSP-214xx/SC5xx/215xx ^ ADAU145x/146x ^
| ---------------------------------------- | -------------------------------------------------------------------------------- | ---------------------------------------- | ---------------------------- |
| Index_Channel<fc #ff0000>X</fc> | Selects the output channel to route the input | Float | NA |
Note:    
     * <fc #ff0000>X</fc> - Channel Index
Analog Devices Wiki

Page Tools
