This version (14 Sep 2022 12:15) was approved by Angu Sewa.The Previously approved version (04 Feb 2020 10:36) is available.
Table of Contents
Click here to return to the Basic page
Seven Band Level Detector
Description
The Seven-Band Level Detector block calculates the input signal level, reading directly from the hardware in real-time, and displays the level graphically in seven frequency band meter displays:
- <100Hz
- 250Hz
- 500Hz
- 1kHz
- 2.5kHz
- 5kHz
- >10kHz
The level detector performs the analysis only and does not modify the input signal. The signal at the output pin is identical to the input.
Use the On / Off button to enable or disable the display. The level detector will not function until the schematic design has been compiled and downloaded to the hardware and a USB communication channel is properly configured.
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/SC5xx | ADAU145x/146x |
|---|---|---|---|
| —————————————————-- | ——————-- | ——————————-- | —————————- |
| Seven Band Level Detector | B/S | B/S | NA |
Pins
Input
| ———————- | ————-- | ———————- |
| Input0 | Audio | Input Channel 0 |
Output
| ———————- | ————-- | ———————- |
| Output0 | Audio | Output channel 0 |
Configurable Parameters
| GUI Parameter | Default Value | Range | Function Description |
|---|---|---|---|
| —————————————- | ———————- | —————— | —————————————- |
| On/Off Switch | OFF | ON/OFF | Enable or Disable the Level Detector |
DSP Parameters
No DSP Parameters
resources/tools-software/sigmastudiov2/modules/basic/sevenbandleveldetector.txt · Last modified: 11 May 2021 15:28 by Nikhin Shetty