This version is outdated by a newer approved version.
This version (12 May 2017 17:21) was approved by Mark Looney.The Previously approved version (01 Mar 2017 19:01) is available.
This version (12 May 2017 17:21) was approved by Mark Looney.The Previously approved version (01 Mar 2017 19:01) is available.This is an old revision of the document!
Table of Contents
EVAL-ADIS2 EVALUATION SYSTEM
The EVAL-ADIS2 is a PC-based evaluation system that supports communication with most ADIS16xxx products, using the following block diagram.
The following picture identifies the key features associated with this evaluation system. Click on the image to access a larger view.
Quick Start Guide
The following sequence of steps provides the quickest and most reliable process for setting up your EVAL-ADIS2 for operation on a PC.
Step #1: Set DUT Supply
JP1 provides three DUT power supply options: +3.3V, +5V and Ext (external supply).
Use the following table to identify the correct JP1 setting for the DUT:
| JP1 = +3.3V | JP1 = +5V |
|---|---|
| ADIS16201, ADIS16203, ADIS16209, ADIS16210, ADIS16223, ADIS16227, ADIS16228, ADIS16445, ADIS16448, ADIS16460, ADIS16480, ADIS16485, ADIS16488A, ADIS16490 | ADIS16133, ADIS16135, ADIS16136, ADIS16137, ADIS16260, ADIS16265, ADIS16266, ADIS16300, ADIS16305, ADIS16334, ADIS16360, ADIS16362, ADIS16365, ADIS16367, ADIS16375, ADIS16400, ADIS16405, ADIS16407 |
External Supply Option
In order to use external supply option, remove the header from JP1 and solder the middle post to the hole that has the EXT label on the EVAL-ADIS2. The next revision of this board will move this hole so that this option will be available using the same header that connects to the +3.3V and +5V settings on JP1.
Then, connect the external supply to J3, using the following diagram to illustrate the correct connections:
Step #2: Connecting to the DUT
All ADIS16xxx (DUT) devices connect to the EVAL-ADIS2 through a breakout board. There are two different types of breakout boards, which identify with the type of connection that they make with the ADIS16xxx devices that they support:
1. Connectors (14-pin, 15-pin, 20-pin, 24-pin)
2. Solder-reflow (LGA, BGA)
The following table provides a summary of the most appropriate breakout board for each ADIS16xxx device, which uses a connector-based attachment approach. Click on the breakout board title to access specific steps for connecting the DUT to these boards.
| ADIS16IMU1/PCBZ | ADIS16IMU2/PCBZ | ADIS16IMU2/PCBZ ADIS1644X/FLEX | ADIS16IMU4/PCBZ | ADIS16ACL1/PCBZ | ADIS16ACL2/PCBZ | TBD |
|---|---|---|---|---|---|---|
| ADIS16133 ADIS16135 ADIS16136 ADIS16137 ADIS16375 ADIS16480 ADIS16485 ADIS16488A ADIS16490 | ADIS16360 ADIS16362 ADIS16364 ADIS16365 ADIS16367 ADIS16400 ADIS16405 ADIS16407 | ADIS16334 ADIS16445 ADIS16448 | ADIS16460 | ADIS16210 ADIS16228 | ADIS16223 ADIS16227 | TBD |
Step #3:Connecting the Breakout Board to the EVAL-ADIS2
Each breakout board connects to the EVAL-ADIS2 through a 16-pin, 1mm ribbon cable, which connects to J1 on the EVAL-ADIS2.
Step #4: USB Driver Download and Installation
Download the USB driver for the EVAL-ADIS2 and store it in a convenient, temporary folder on the Test PC. Then, double click on this file. Answer all of the questions presented by the installation routine.
Click here to download the latest USB driver for the EVAL-ADIS2
Coming soon: graphical examples of each window in the installer process.
Step #5: Download Application Software
Download the DUT's evaluation software package, but clicking on its heading in the following table. Store the file in a convenient location on the test PC and extract its executable file.
| IMU Evaluation Software | Vibration Evaluation Software | ADIS16223 Vibration Evaluation Software |
|---|---|---|
| ADIS16133, ADIS16135, ADIS16136, ADIS16137, ADIS16201, ADIS16203, ADIS16260, ADIS16265, ADIS16266, ADIS16334, ADIS16360, ADIS16362, ADIS16364, ADIS16365, ADIS16367, ADIS16375, ADIS16400, ADIS16405, ADIS16407, ADIS16445, ADIS16448, ADIS16460, ADIS16480, ADIS16485, ADIS16488A, ADIS16490 | ADIS16227, ADIS16228, ADIS16229 | ADIS16223 |
Step #6: Connect EVAL-ADIS2 to USB port on PC
Use a Mini USB cable to connect J2 (Mini USB connector) to a USB port on the PC. LED2 will light up very quickly and LED1 will take as long as 10 seconds to illuminate.
Step #7: Launch Evaluation Software
Double click on the executable file to launch the application software.
IMU Evaluation Software
Please visit the IMU Evaluation Software Wiki Guide to get some basic operational instructions.
Coming soon: Update to include latest version
Vibration Evaluation Software
Please visit the Vibration Evaluation Software Wiki Guide to get some basic operational instructions.
Coming soon: Update to include latest version
Product Tutorials
Coming soon: Product-specific tutorials, tips and tricks
Tool Cross Reference Guide
The following table provides a list of products that the EVAL-ADIS2 supports, along with the appropriate breakout board, JP1 setting and software package for each of these products.
| GENERIC PART NUMBER | BREAKOUT BOARD | JP1 SETTING | SOFTWARE PACKAGE |
|---|---|---|---|
| ADIS16133 | ADIS16IMU1/PCBZ | +5V | IMU Evaluation Software |
| ADIS16135 | ADIS16IMU1/PCBZ | +5V | IMU Evaluation Software |
| ADIS16136 | ADIS16IMU1/PCBZ | +5V | IMU Evaluation Software |
| ADIS16137 | ADIS16IMU1/PCBZ | +5V | IMU Evaluation Software |
| ADIS16201 | ADIS16201/PCBZ | +3.3V | IMU Evaluation Software |
| ADIS16203 | ADIS16203/PCBZ | +3.3V | IMU Evaluation Software |
| ADIS16209 | ADIS16209/PCBZ | +3.3V | IMU Evaluation Software |
| ADIS16210 | ADIS16ACL1/PCBZ | +3.3V | IMU Evaluation Software |
| ADIS16223 | ADIS16ACL2/PCBZ | +3.3V | ADIS16223 Vibration Evaluation Program |
| ADIS16227 | ADIS16ACL2/PCBZ | +3.3V | Vibration Evaluation Program |
| ADIS16228 | ADIS16ACL1/PCBZ | +3.3V | Vibration Evaluation Program |
| ADIS16265 | ADIS16265/PCBZ | +5V | IMU Evaluation Software |
| ADIS16334 | ADIS16IMU2/PCBZ | +5V | IMU Evaluation Software |
| ADIS1644X/FLEX | |||
| ADIS16362 | ADIS16IMU2/PCBZ | +5V | IMU Evaluation Software |
| ADIS16364 | ADIS16IMU2/PCBZ | +5V | IMU Evaluation Software |
| ADIS16365 | ADIS16IMU2/PCBZ | +5V | IMU Evaluation Software |
| ADIS16367 | ADIS16IMU2/PCBZ | +5V | IMU Evaluation Software |
| ADIS16375 | ADIS16IMU1/PCBZ | +5V | IMU Evaluation Software |
| ADIS16405 | ADIS16IMU2/PCBZ | +5V | IMU Evaluation Software |
| ADIS16407 | ADIS16IMU2/PCBZ | +5V | IMU Evaluation Software |
| ADIS16445 | ADIS16IMU2/PCBZ | +3.3V | IMU Evaluation Software |
| ADIS1644X/FLEX | |||
| ADIS16448 | ADIS16IMU2/PCBZ | +3.3V | IMU Evaluation Software |
| ADIS1644X/FLEX | |||
| ADIS16460 | ADIS16IMU4/PCBZ | +3.3V | IMU Evaluation Software |
| ADIS16480 | ADIS16IMU1/PCBZ | +3.3V | IMU Evaluation Software |
| ADIS16485 | ADIS16IMU1/PCBZ | +3.3V | IMU Evaluation Software |
| ADIS16488A | ADIS16IMU1/PCBZ | +3.3V | IMU Evaluation Software |
| ADIS16490 | ADIS16IMU1/PCBZ | +3.3V | IMU Evaluation Software |
J1 Pin Assignments
Here are the pin assignments for J1, which is the connector that will interface with all of the ADIS16xxx breakout boards.
System Requirements
The EVAL-ADIS2 is compatible with most PCs that run Windows operating systems.
Ordering
Development Support
No official support Limited, please feel free to try these examples out.
resources/eval/user-guides/inertial-mems/evaluation-systems/eval-adis2.1494602484.txt.gz · Last modified: 12 May 2017 17:21 by Mark Looney