This version is outdated by a newer approved version.DiffThis version (07 Dec 2022 14:52) was approved by Harshvardhan Bhatia.The Previously approved version (30 Nov 2022 22:07) is available.Diff

This is an old revision of the document!

EVAL-ADTF3175D-NXZ Initial Bring-up

Please go through the steps if you check both of the following conditions:

  • You have an EVAL-ADTF3175D-NXZ kit as shown in the sticker below
  • Your module serial number DOES NOT start with DV11

  1. Download the latest evaluation software package from here:
  2. Install the evaluation software
    • At the end of the installation opt to download the micro-SD Card image.
      If you missed this step, not go to the image folder to execute the script: get_image.cmd (Windows) or (Linux).
    • Unzip the downloaded archive to access the SD Card image and firmware binary.
      • The micro-SD Card image will be named similarly to the following,
      • The firmware binary will be named similarly to fwUpdate_3.2.2.bin.
  3. Reflash the micro-SD Card included in your kit (for example - SD card flashing guide
  4. Flash firmware (for example fwUpdate_3.2.2.bin) onto module - Link
  5. Run GUI as specified in startup guide - Link
resources/eval/user-guides/eval-adtf3175d-nxz-bringup.1670421130.txt.gz · Last modified: 07 Dec 2022 14:52 by Harshvardhan Bhatia