This is an old revision of the document!
EVAL-ADTF3175D-NXZ Initial Bring-up
If you have an EVAL-ADTF3175D-NXZ eval system (sticker on the box indicated this). Please go through the following steps to correctly setup your system.
Download the latest evaluation software package from
here:
Install the evaluation software
At the end of the installation opt to download the micro-
SD Card image.
If you missed this step, not go to the image folder to execute the script: get_image.cmd (Windows) or get_image.sh (Linux).
Unzip the downloaded archive to access the
SD Card image and firmware binary.
-
Flash firmware (for example fwUpdate_3.2.2.bin) onto module -
Link
Run
GUI as specified in startup guide -
Link