This version is outdated by a newer approved version.
This version (04 Jul 2022 17:09) was approved by Harshvardhan Bhatia.The Previously approved version (04 Jul 2022 16:19) is available.
This version (04 Jul 2022 17:09) was approved by Harshvardhan Bhatia.The Previously approved version (04 Jul 2022 16:19) is available.This is an old revision of the document!
EVAL-ADTF3175D-NXZ initial bringup
If you have an EVAL-ADTF3175D-NXZ eval system (sticker on the box indicated this). Please go through the following steps to correctly setup your system.
- Install GUI Software : Link
- At the end save the sd card image included with the installer
- Reflash the sd-card included in your kit - SD card flashing guide
- Download latest ADSD3500 firmware - Link
- Load firmware onto module - Link
- Run GUI as specified in startup guide - Link
resources/eval/user-guides/eval-adtf3175d-nxz-bringup.1656947374.txt.gz · Last modified: 04 Jul 2022 17:09 by Harshvardhan Bhatia