This version (10 Feb 2021 04:45) was approved by Robin Getz.The Previously approved version (29 Jan 2021 05:44) is available.
Help and Support
Analog Devices uses six designations to inform our customers where a semiconductor product is in its life cycle. From emerging innovations to products which have been in production for twenty years, we understand that insight into life cycle status is important. Device life cycles are tracked on their individual product pages on analog.com, and should always be consulted before making any design decisions.
This particular articl/edocument/design has been retired or deprecated, which means it is no longer maintained or actively updated, even though the devices themselves may be Recommended for New Designs or in Production. This page is here for historical/reference purposes only.
If you have any questions regarding the ADI motor drive solutions or are experiencing any problems while using the boards or while following any of the user guides feel free to ask us a question. Questions can be asked on our EngineerZone support community.
For questions regarding the hardware or the HDL reference design please state them in the FPGA Reference Designs sub-community. For questions regarding the Linux drivers for any of the components on the motor control boards please use the Linux Software Drivers sub-community.
When asking a question please take the time to give a detailed description of your problem. Always include on which platform you are currently using the AD-FMCMOTCON1-EBZ. If you are experiencing a problem please state the steps you have executed, the result you expected you would get and the result you actually got. By doing so you enable us to provide you precise and detailed answers in a timely manner.
Before asking questions please also take the time to check if somebody else already asked the same question and already got an answer.
For more information also check:
Where to Buy
resources/eval/user-guides/ad-fmcmotcon1-ebz/help_and_support.txt · Last modified: 10 Feb 2021 04:45 by Robin Getz