Both sides previous revisionPrevious revisionNext revision | Previous revision |
university:tools:pluto:hacking:hardware [17 Mar 2021 13:40] – add rakon datasheet Robin Getz | university:tools:pluto:hacking:hardware [21 Mar 2023 15:49] (current) – [New Rev D features] Robin Getz |
---|
===== Revision D ===== | ===== Revision D ===== |
Revision C was never released, and was identical to rev C (minus 2 blue wires((Always doublecheck if UART ''Tx'' should be connected to ''Tx'' or ''Rx'' of the next chip, English nomenclature is terrible))), so we are only releasing rev D info. Since firmware is the same between rev D and C, the firmware identifies and recognizes rev D hardware as rev ''C''. | Revision C was never released, and was identical to rev C (minus 2 blue wires((Always doublecheck if UART ''Tx'' should be connected to ''Tx'' or ''Rx'' of the next chip, English nomenclature is terrible))), so we are only releasing rev D info. Since firmware is the same between rev D and C, the firmware identifies and recognizes rev D hardware as rev ''C''. |
| |
| Revision D started showing up in the wild early 2021. |
| ==== New Rev D features ==== |
| |
| There are new internal rev D features: |
| * addition of internal [[wp>Hirose_U.FL|U.FL]] connectors for: |
| * second receive channel |
| * second transmit channel |
| * Clock input |
| * Clock output (only a copy of Clock input, not functional for the internal clock) |
| * USB UART |
| * breakout pins for I2C and SPI |
| * 3.3V GPO levels |
| |
| u.FL to SMA cables can be picked up for a few dollars at a variety of locations including [[digikey>U.FL to SMA|Digkey]], [[mouser>U.FL to SMA|Mouser]], [[https://www.adafruit.com/product/851|AdaFruit]] or [[https://www.sparkfun.com/products/9145|Sparkfun]]. |
| |
| {{:university:tools:pluto:hacking:pluto.png?600|}} |
| |
| The standard features - Rx1, Rx2, USB OTG work as previously. See how to add these to your units, check out how to [[:university:tools:pluto:users:customizing#updating_to_the_ad9364|set config settings]]. |
| |
| {{youtube>ph0Kv4SgSuI}} |
| |
| With a few more holes in the case, and a few dollars of cables, this should give you something like (this connects the additional Rx and Tx, and CLK input): |
| |
| {{:university:tools:pluto:hacking:pluto_with_wires.png?400|}} |
| |
<WRAP round download> | <WRAP round download> |
* {{./plutosdr_schematic_revd.pdf|Rev D Schematics}} | * {{./plutosdr_schematic_revd_0.1.pdf|Rev D Schematics}} |
* {{./plutosdr_gerber_revd.zip|Rev D Gerbers}} (This file is [[http://www.7-zip.org/7z.html|compressed]]) | * {{./plutosdr_gerber_revd.zip|Rev D Gerbers}} (This file is [[http://www.7-zip.org/7z.html|compressed]]) |
* {{./plutosdr_bom_revd.xlsx|Rev D Bill of materials}} | * {{./plutosdr_bom_revd.xlsx|Rev D Bill of materials}} |
* {{./plutosdr_brd_revd.zip|Rev D Allegro Board File}} (This file is [[http://www.7-zip.org/7z.html|compressed]]). Get the [[https://www.cadence.com/en_US/home/tools/pcb-design-and-analysis/allegro-downloads-start.html|Allegro FREE Physical Viewer]] to view. | * {{./plutosdr_brd_revd.zip|Rev D Allegro Board File}} (This file is [[http://www.7-zip.org/7z.html|compressed]]). Get the [[https://www.cadence.com/en_US/home/tools/pcb-design-and-analysis/allegro-downloads-start.html|Allegro FREE Physical Viewer]] to view. |
* {{|Rev D Cadence Project}} (currently missing - wanted to make sure I had the right file) | * {{./plutosdr_cadence_revd.zip|Rev D Cadence Project}} (This file is [[http://www.7-zip.org/7z.html|compressed]]) |
* {{./pluto_revb_3d.zip|Rev B 3D model (Case, bare PCB, connectors)}} are the same as previous versions. | * {{./pluto_revb_3d.zip|Rev B 3D model (Case, bare PCB, connectors)}} are the same as previous versions. |
* There are few pictures of rev D in the [[../marketing/|Marketing]] section as well. | * There are few pictures of rev D in the [[../marketing/|Marketing]] section as well. |