Differences

This shows you the differences between two versions of the page.

--- university:courses:electronics:electronics-lab-10 [05 Mar 2019 12:26] – [Using an NPN transistor array:] Antoniu Miclaus
+++ university:courses:electronics:electronics-lab-10 [05 Nov 2021 15:29] (current) – [Activity: Shunt regulator] Doug Mercer
@@ Line 1: / Line 1: @@
-====== Activity 10. Shunt regulator ======
+======Activity: Shunt regulator - ADALM2000======
 ===== Objective: =====
@@ Line 29: / Line 29: @@
 <WRAP centeralign> Figure 2 Band-gap shunt regulator Breadboard Circuit </WRAP>
-Waveform generator W1 should be configured for a 1 KHz triangle wave with 4 volt amplitude and 2V offset. The Single ended input of scope channel 2 (2+) is used to measure the regulated output voltage at the collector of Q<sub>3</sub>.
+Waveform generator W1 should be configured for a 1 KHz triangle wave with 4 volt amplitude peak-to-peak and 2V offset. The Single ended input of scope channel 2 (2+) is used to measure the regulated output voltage at the collector of Q<sub>3</sub>.
 ===== Procedure: =====
@@ Line 59: / Line 59: @@
 <WRAP round download>
 **Resources:**
-  * Fritzing files: [[ https://minhaskamal.github.io/DownGit/#/home?url=https://github.com/analogdevicesinc/education_tools/tree/master/m2k/fritzing/shunt_volt_reg_bb | shunt_reg_bb]]
+  * Fritzing files: [[downgit>education_tools/tree/master/m2k/fritzing/shunt_volt_reg_bb | shunt_reg_bb]]
-  * LTSpice files: [[ https://minhaskamal.github.io/DownGit/#/home?url=https://github.com/analogdevicesinc/education_tools/tree/master/m2k/ltspice/shunt_reg_ltspice | shunt_reg_ltspice]]
+  * LTSpice files: [[downgit>education_tools/tree/master/m2k/ltspice/shunt_reg_ltspice | shunt_reg_ltspice]]
 </WRAP>
 **Return to Lab Activity [[university:courses:electronics:labs|Table of Contents]]**

Wiki

Analog Devices Wiki

Differences

Analog Devices Wiki

Differences

Page Tools