The most recent version of this page is a draft.
This version (10 Feb 2021 12:48) was approved by Sanjeeva Reddy.
This version (10 Feb 2021 12:48) was approved by Sanjeeva Reddy.This is an old revision of the document!
Table of Contents
Click here to return to the Multiplexers and Demultiplexers page
Simple Router
Description
The Simple Router block routes the N different inputs to M different Outputs with multipled by respective gains.
Usage
Click on the icon to open the Router window to configure the gain for respective input channels for respective outputs.
Targets Supported
| Name | ADSP-214xx(Sample) | ADSP-214xx(Block) | ADSP-215xx/ADSP-SC5xx(Sample) | ADSP-215xx/ADSP-SC5xx(Block) |
|---|---|---|---|---|
| Simple Router | No | Yes | No | Yes |
Pins
Input
| Name | Type | Description |
|---|---|---|
| Input0 | Audio | Input channel 0 |
| Input1 | Audio | Input channel 1 |
Output
| Name | Type | Description |
|---|---|---|
| Output0 | Control | Output channel 0 |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| SlectedInputTabM_OutputN | 0 dB | -30 to 6 dB | Gain factor |
| GainDB_OutputM_InputN | 0 dB | -30 to 6 dB | Gain factor |
| ISDb_OutputM_InputN | True | True/False | Decides the Gain control in db/linear |
| NumInputs | 2 | 20 | Number of input channels. Change in input channels requires re-compilation |
| NumOutputs | 1 | 20 | Number of input channels. Change in output channels requires re-compilation |
DSP Parameters
| Parameter Name | Description | ADSP-214xx/SC5xx/215xx |
|---|---|---|
| GainArray | scaling of the inputs | Float |
| OutputArray | scaling of the inputs | Float |
/srv/wiki.analog.com/data/pages/resources/tools-software/sigmastudiov2/modules/muxesanddemuxes/simplerouter.txt · Last modified: 13 May 2021 06:23 by Nikhin Shetty