This version (13 Sep 2022 06:33) was approved by Angu Sewa.The Previously approved version (18 Mar 2021 01:50) is available.
Table of Contents
Click here to return to the Multiplexers and Demultiplexers page
Switch Multiplexer
Description
The Mux Switch block routes one of many possible input signals to the output. The strip of radio buttons is used to select the input signal.
Variants
- Nx1 Switch
- Nx2 Switch
- Nx4 Switch
- Nx6 Switch
- Nx8 Switch
- Nx12 Switch
Note: * Slew Type - Slew type can be selected for each of the above Switches
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/SC5xx | ADAU145x/146x |
|---|---|---|---|
| —————————— | ——————-- | ——————————-- | —————————- |
| Nx1 (No Slew) | S/B | S/B | S |
| Nx1 (SW Slew) | S/B | S/B | NA |
| Nx1 (HW Slew) | NA | NA | S |
| Nx2 (No Slew) | S/B | S/B | S |
| Nx2 (SW Slew) | S/B | S/B | NA |
| Nx2 (HW Slew) | NA | NA | S |
| Nx4 (No Slew) | NA | NA | S |
| Nx6 (No Slew) | S/B | S/B | S |
| Nx8 (No Slew) | S/B | S/B | S |
| Nx12 (No Slew) | B | B | NA |
Pins
Input
| Name | Type | Description |
|---|---|---|
| ———————- | ————-- | ———————- |
| InputX | Audio | Input Channel X |
Output
| Name | Type | Description |
|---|---|---|
| ———————- | ————-- | ———————- |
| OutputX | Audio | Output Channel X |
Note:
- X - Channel Index
Configurable Parameters
| GUI Parameter | Default Value | Range | Function Description |
|---|---|---|---|
| —————————————- | ———————- | —————— | —————————————- |
| NumChannels | 2 | 2 to 20 | Number of channels. Applicable to Nx1 modules. Change in this value requires re-compilation |
| NumStereoChannels | 2 | 2 to 20 | Number of stereo channels. Applicable to Nx2 modules. Change in this value requires re-compilation |
| NumSources | 2 | 2 to 20 | Number of channel group. Applicable to Nx4/6/8/12 modules. Change in this value requires re-compilation |
| SelectedVal/SelectedIndex | 0 | NA | Selected input index |
| StepSize | 10 | 8 to 16 | Slew Step Size. Applicable to SW Slew modules |
| SlewType | RC Slew | NA | Slew type. Applicable to HW slew modules |
| CustomVal | 0x208A | NA | Custom slew value. Applicable to HW slew modules |
DSP Parameters
| Parameter Name | Description | ADSP-214xx/SC5xx/215xx | ADAU145x/146x |
|---|---|---|---|
| —————————————- | ——————————————————————————-- | —————————————- | —————————- |
| Index | Selects the input channel to route the input through output | Integer | Integer |
| slew_mode | Slew mode and value for HW slew (only for HW slew) | NA | Integer |
resources/tools-software/sigmastudiov2/modules/muxesanddemuxes/muxswitch.txt · Last modified: 13 Sep 2022 06:33 by Angu Sewa