This version (18 May 2021 09:01) was approved by John Joseph.The Previously approved version (07 May 2021 14:33) is available.
Table of Contents
Click here to return to the IO page
Interface Write
Description
The Interface Write block sends signals from the schematic to an interface output register.
Usage
Each block is associated with only one interface register; select the appropriate one from the drop-down menu.
Observe that as you drag more blocks to your schematic, your number of interfaces available decreases.
Note: This block is only available for DSPs with GPIOs or auxiliary ADC.
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/ADSP-SC5xx | ADAU145x/1456x |
|---|---|---|---|
| —————————————- | —————————————— | ————————————————-- | ——————————————- |
| Interface Write | Not supported | Not supported | Sample |
Pins
Input
| Name | Type | Description |
|---|---|---|
| ————————-- | ——————————— | ————————————- |
| Input | Logic | Interface write input channel |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| —————————————- | ———————- | ————————————- | —————————————- |
| SelectedIFIPChannel | INTFACE_0 | INTFACE_0 to INTFACE_7 | Selects the Interface Read channel |
DSP Parameters
Not applicable
DSP Parameter Computation
Not applicable
resources/tools-software/sigmastudiov2/modules/inputoutput/interfacewrite.txt · Last modified: 12 May 2021 13:42 by Prasad Kamath