Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
resources:tools-software:sigmastudiov2:modules:dynamicsprocessors:rmswithexternalinput [15 Jan 2021 11:00] – [RMS w/Ext Detector] Nikhin Shettyresources:tools-software:sigmastudiov2:modules:dynamicsprocessors:rmswithexternalinput [28 Sep 2023 10:08] (current) – [Configurable Parameters] Arpit Arora
Line 1: Line 1:
-[[resources/tools-software/sigmastudiov2/modules/dynamicprocessors|Click here to return to the Dynamic Processors page]]+[[resources/tools-software/sigmastudiov2/modules/dynamicsprocessors|Click here to return to the Dynamic Processors page]]
 ====== RMS w/Ext Detector ====== ====== RMS w/Ext Detector ======
 \\ \\
Line 7: Line 7:
 ===== Description ===== ===== Description =====
 The RMS w/Ext Detector Compressor block computes the RMS level of the control signal and applies the compressor gain to the input signal based on the RMS value. The RMS w/Ext Detector Compressor block computes the RMS level of the control signal and applies the compressor gain to the input signal based on the RMS value.
 +\\
 +===== Variants =====
 +  - RMS w/Ext Detector
 +  - RMS w/Ext Detector Input and Gain Out
 \\ \\
 ===== Targets Supported ===== ===== Targets Supported =====
-^Name^ADSP-214xx(Sample)^ADSP-214xx(Block)^ADSP-215xx/ADSP-SC5xx(Sample)^ADSP-215xx/ADSP-SC5xx(Block)^ +^ Name             ^ ADSP-214xx ^ ADSP-215xx/SC5xx ^ ADAU145x/146x ^ 
-|RMS w/Ext Detector| Yes | Yes|Yes| Yes|+| ------------------------------------------------------ | --------------------------- | -----------------------------| ---------------------------- | 
 +| RMS w/Ext Detector | B/S        | B/S              | S           | 
 +| RMS w/Ext Detector Input and Gain Out| NA        | NA              | S           |
 \\ \\
 ===== Pins ===== ===== Pins =====
 ==== Input ==== ==== Input ====
 ^Name^Type^Description^ ^Name^Type^Description^
 +| --------------------------------------- | ------------------------------ | ------------------------------------------------ | 
 |ExtDetectorInput|Control|Determines the amount of compressor gain applied to the input signal|  |ExtDetectorInput|Control|Determines the amount of compressor gain applied to the input signal| 
 |Input1|Audio|Input channel1| |Input1|Audio|Input channel1|
 ==== Output ==== ==== Output ====
 ^Name^Type^Description^ ^Name^Type^Description^
 +| --------------------------------------- | ------------------------------ | ------------------------------------------------ | 
 |Output1|Audio|Output channel1| |Output1|Audio|Output channel1|
 \\ \\
 ===== Configurable Parameters ===== ===== Configurable Parameters =====
 ^GUI Parameter Name^Default Value^Range^Function Description^ ^GUI Parameter Name^Default Value^Range^Function Description^
-|TimeConstant|121| 1 to 8686 dB/s|Controls the time constant (TC) in dB/second that is used for calculating the RMS input value. The time constant determines how rapidly the compressor will respond to input signal level changes, e.g. the “Attack” time.|+| ----------------------------------------------               | ----------------------------        | ------------------------------------- |---------------------------------------------------------------- | 
 +|TimeConstant|121| 1 to 10000 dB/s|Controls the time constant (TC) in dB/second that is used for calculating the RMS input value. The time constant determines how rapidly the compressor will respond to input signal level changes, e.g. the “Attack” time.|
 |Hold|0 ms|0 to 2000 ms|Controls the time (in ms) the compressor maintains its current output  gain setting before it starts decreasing as the input level decrease.| |Hold|0 ms|0 to 2000 ms|Controls the time (in ms) the compressor maintains its current output  gain setting before it starts decreasing as the input level decrease.|
 |Decay| 10 dB/s| 0 to 10000 dB/s|Controls the rate at which the compressor gain decreases in response to decrease in the input signal level, e.g. the “Release” time.| |Decay| 10 dB/s| 0 to 10000 dB/s|Controls the rate at which the compressor gain decreases in response to decrease in the input signal level, e.g. the “Release” time.|
Line 32: Line 41:
 \\ \\
 ===== DSP Parameters ===== ===== DSP Parameters =====
-^Parameter Name^Description^ADSP-214xx/SC5xx/215xx^ +^Parameter Name^Description^ADSP-214xx/SC5xx/215xx^ ADAU145x/146x ^ 
-|TimeConstant|RMS time constant value|Float| +|------------------------------ |------------------------------------------ |------------------------------------------| ---------------------------------------------- | 
-|Hold|Hold value|Float| +|TimeConstant|RMS time constant value|Float| 8.24 format| 
-|Decay|Decay value|Float| +|Hold|Hold value|Float| 8.24 format| 
-|Table|Table values | Float| +|Decay|Decay value|Float| 8.24 format| 
-|LogCoeff| Constant coefficients|Float| +|Table|Table values | Float| 8.24 format| 
 +|LogCoeff| Constant coefficients|Float| 8.24 format|
 \\ \\
 ===== DSP Parameter Computation ===== ===== DSP Parameter Computation =====
resources/tools-software/sigmastudiov2/modules/dynamicsprocessors/rmswithexternalinput.1610704837.txt.gz · Last modified: 15 Jan 2021 11:00 by Nikhin Shetty

Page Tools