This version is outdated by a newer approved version.
This version (07 May 2021 13:28) is a draft.
Approvals: 0/1The Previously approved version (04 Feb 2020 10:29) is available.
This version (07 May 2021 13:28) is a draft.Approvals: 0/1The Previously approved version (04 Feb 2020 10:29) is available.
This is an old revision of the document!
Table of Contents
Click here to return to the Basic page
Max Value Hold
Description
The MaxValueHold block monitors one (or more) input(s) and routes the max value of the input to the output. This block held's the max value while the control input is 1 and reset the max value while the control input is 0.
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/SC5xx | ADAU145x/146x |
|---|---|---|---|
| ———————————————————— | ——————-- | ——————————-- | —————————- |
| MaxValueHold | B/S | B/S | B/S |
Pins
Input
| Name | Type | Description |
|---|---|---|
| —————————— | ———————————————————— | —————————— |
| Reset | Control | Resets the maximum value |
| InputX | Audio | Input channel X |
Note:
- X - Channel Index
Output
| Name | Type | Description |
|---|---|---|
| —————————— | ———————————————————— | —————————— |
| Output | Audio | Output channel |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| —————————— | ————————— | —————————- | ———————————————————- |
| NumChannels | 1 | 20 | Number of input and output channels. Change in this value requires re-compilation |
resources/tools-software/sigmastudiov2/modules/basic/maxvaluehold.1620386884.txt.gz · Last modified: 07 May 2021 13:28 by Nikhin Shetty