This version (14 Sep 2022 13:33) was approved by Angu Sewa.The Previously approved version (06 May 2021 11:52) is available.
Table of Contents
Click here to return to the Arithmetic and Logic page
Signal Add
Description
The Signal Add block adds the inputs together and no other modification of the signal is done. Care must be taken to avoid clipping.
Variants
- Signal Add
- Complex Signal Add
- Scalar Add
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/SC5xx | ADAU145x/146x |
|---|---|---|---|
| —————————— | ——————-- | ——————————-- | —————————- |
| Signal Add | B/S | B/S | S |
| Complex Signal Add | NA | NA | B |
| Scalar Add | NA | NA | B |
Pins
Input
| Name | Type | Description |
|---|---|---|
| ————————————— | —————————- | ————————————— |
| Input0 | Audio | Input channel 0 |
| Input1 | Audio | Input channel 1 |
Output
| Name | Type | Description |
|---|---|---|
| ————————————-- | —————————- | —————————————- |
| Output | Audio | Output channel |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| —————————— | ——————————- | ————————————-- | ——————————————————- |
| NumChannels | 2 | 20 | Number of input channels.Change in this value require re-compilation |
DSP Parameters
NO DSP Parameters
resources/tools-software/sigmastudiov2/modules/arithmeticandlogic/signaladd.txt · Last modified: 14 Sep 2022 13:33 by Angu Sewa