This version (10 Feb 2021 10:05) was approved by John Joseph.
Table of Contents
ADSP-SC589 MINI BOARD
Connections
ADSP-SC589 MINI Board Connections
Settings
The board settings for running SigmaStudio on ADSP-SC589 MINI BOARD, using the Default Application is given in the below tables.
| Switch | Setting |
|---|---|
| SW2 | Reset |
| SW3 | Not Used |
| SW4 | Not Used |
Switch Settings for ADSP-SC589 MINI BOARD
| Jumper | Setting |
|---|---|
| JP1 | Boot Mode (1 and 2 connected for SPI boot) else disconnected |
Jumper Settings for ADSP-SC589 MINI BOARD
| Port | Setting |
|---|---|
| P1 | Debug port connected to ADZS-ICE-2000/ICE-1000 |
| P2 | Connected with SigmaStudio USBi |
| P3 | Connected to Power |
Port Settings for ADSP-SC589 MINI BOARD
resources/tools-software/sigmastudiov2/gettingstarted/adsp-sc589_mini_board.txt · Last modified: 10 Feb 2021 10:05 by John Joseph