This version (30 Jun 2017 11:09) was approved by Venkatesan Krishnamoorthy.The Previously approved version (19 Apr 2017 13:13) is available.
Table of Contents
DC Input Entry
Click here to return to the sources page
The DC Input Block allows you to generate a DC, direct current, signal(a constant numerical value). This Block can be used to generate control signals for Multiplexers and Lookup Tables.
The block's controls allow the DC value and the format to be set. There are 32/28 available bits which can be used to represent decimal values depends on the SigmaDSP.
Output Pins
| Name | Format [int/dec] - [control/audio] | Function Description |
|---|---|---|
| Pin 0: Output Signal | Decimal - | DC output signal |
GUI Controls
| GUI Control Name | Default Value | Range | Function Description |
|---|---|---|---|
| DC | 1 | 0 - (Depends on the format select) | This control gives the DC, direct current, signal(a constant numeric value) |
| format | 8.24/ 5.23 | Valid fixeed point formats with 32/28 bits | This control decides the range of DC control |
Grow and Add Algorithm
The module currently does not support grow functionality and Add Algorithm is supported.
Supported to Multiple Instances.
DSP Parameter Information
ADAU145x
| GUI Control Name | Compiler Name | Function Description |
|---|---|---|
| DC | DCInp145XBlkAlg1value | DC output signal |
Here,
- Green - Algorithm Name
- Red - Instance Number (Changes for each instance)
- Blue - Parameter Name
Supported DSPs
- ADAU145x (Sample and Block)
- ADAU144x
- ADAU170x
- ADAU176x
- AD194x
- ADAU140x
resources/tools-software/sigmastudio/toolbox/sources/dcinputentry.txt · Last modified: 19 Apr 2017 13:17 by Venkatesan Krishnamoorthy