This version (22 Jan 2016 06:42) was approved by Venkatesan Krishnamoorthy.The Previously approved version (22 Jan 2016 06:41) is available.
I2C Periodic Read
Click here to return to the Master Control Port section.
The 'I2C Periodic Read' block reads a particular sub address from any I2C slave periodically and sends the value read in the output pin.
Click on the configure button to configure the parameters for I2C read.
Create Multiple instances for monitoring multiple slaves/ multiple sub address from same slave.
GUI Control
| GUI Control Name | Default Value | Range | Function Description |
|---|---|---|---|
| Bitrate | 400 kHz | 20 - 400 kHz | I2C Speed |
| Device Address | 0 | 0 – 127 | I2C Slave Device Address |
| Read Address | 0 | 0 to Pow(2, Address Length) - 1 | Sub- address of the slave to be read |
| Address Length | 2 | 1-4 | Length of the sub address |
| Data Length | 4 | 1-4 | Length of the data to be read |
| Read Interval | 1 ms | 1 - 1000 ms | Interval between 2 consecutive I2C Read |
resources/tools-software/sigmastudio/toolbox/mastercontrolport/i2cperiodicread.txt · Last modified: 22 Jan 2016 06:42 by Venkatesan Krishnamoorthy