This version (06 Aug 2012 22:46) was approved by Brett Gildersleeve.
Interface Write
Click here to return to the Inputs and Outputs Toolbox page.
The Interface Write block sends signals from the schematic to an interface output register.
Each block is associated with only one interface register; select the appropriate one from the drop-down menu.
Observe that as you drag more blocks to your schematic, your number of interfaces available decreases.
Note: This block is only available for DSPs with GPIOs or auxiliary ADC.
resources/tools-software/sigmastudio/toolbox/io/interfacewrite.txt · Last modified: 06 Aug 2012 22:46 by Brett Gildersleeve