This version (24 Jun 2021 09:16) was approved by Sakthivel Perumal.The Previously approved version (19 Dec 2017 07:05) is available.
Table of Contents
Click here to return to the BasicDSP page
Block Max and Hold
| The Max and Hold is a block algorithm compares the input sample with held max value and outputs the highest value. |
Input Pins
| Name | Format [int/dec/float] - [control/audio] | Function Description |
|---|---|---|
| Pin 0: Input | decimal(ADAU145x)- control | Reset signal to the module |
| Pin 1: Input | decimal(ADAU145x)- audio | Input signal to the module |
Output Pins
| Name | Format [int/dec/float] - [control/audio] | Function Description |
|---|---|---|
| Pin 0: Output | decimal(ADAU145x)- audio- audio | Output signal from the module |
Grow Algorithm
The module supports growth of Input channels up to 16 and one reset pin. Add Algorithm is not supported.
GUI Controls
No GUI Controls
DSP Parameter Information
No DSP parameters
Algorithm Description
This module compares the each channel inputs samples in Block of input samples with held_max value and outputs highest value when reset is Off. Compares the each channel inputs samples in Block of input samples and outputs the highest value when reset pin is high.
Supported IC's
| ADAU145x |
| ADAU146x |
resources/tools-software/sigmastudio/toolbox/basicdsp/blockmaxandhold.txt · Last modified: 24 Jun 2021 09:16 by Sakthivel Perumal