Differences

This shows you the differences between two versions of the page.

--- resources:quick-start:ad5689r [22 May 2013 21:44] – changed code to match figures in example 1 and example 2 Yuet Ng
+++ resources:quick-start:ad5689r [23 May 2013 18:40] (current) – add +/- signs, consolidate NC pin descriptions Yuet Ng
@@ Line 6: / Line 6: @@
   * Low drift 2.5 V on-chip reference: 2 ppm/°C typical temperature coefficient
   * Tiny 3 mm × 3 mm 16-lead LFCSP  or 16-lead TSSOP package
-  * Total unadjusted error (TUE): 0.1 % of FSR maximum
+  * Total unadjusted error (TUE): ±0.1% of FSR maximum
-  * Offset error: 1.5 mV maximum
+  * Offset error: ±1.5 mV maximum
-  * Gain error: 0.1% of FSR maximum
+  * Gain error: ±0.1% of FSR maximum
   * High drive capability: 20 mA, 0.5 V  from supply rails
   * User selectable gain of 1 or 2 (GAIN pin)
@@ Line 35: / Line 35: @@
 |V<sub>OUT</sub>A  | Analog output voltage from DAC A.|
 |V<sub>OUT</sub>B  | Analog output voltage from DAC B.|
-|NC                | No Connect. Do not connect to this pin. |
+|NC                | No connect. Do not connect to these pins. |
-|NC                | No Connect. Do not connect to this pin.  |
 |<m>overline{SYNC}</m>   | Connect to serial interface.   |
 |SCLK   | Connect to serial interface.   |

Wiki