Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Last revisionBoth sides next revision
resources:fpga:xilinx:interposer:ad5541a [06 Sep 2013 15:50] – added link to EDK KC705 reference project on Github Lucian Sinresources:fpga:xilinx:interposer:ad5541a [01 Oct 2013 16:08] – [Reference Project Overview] Lucian Sin
Line 50: Line 50:
 <WRAP round download 80%> <WRAP round download 80%>
 \\ \\
-  * {{:resources:fpga:xilinx:interposer:cf_ad5541a_kc705.zip|Reference Design Files}} +  * **AD5541A Driver:** https://github.com/analogdevicesinc/no-OS/tree/master/device_drivers/AD5446 
-  * **AD5541A Driver:** https://github.com/analogdevicesinc/no-OS/tree/master/device_drivers/AD5541A +  * **AD5541A Commands:** https://github.com/analogdevicesinc/no-OS/tree/master/device_commands/AD5446
-  * **AD5541A Commands:** https://github.com/analogdevicesinc/no-OS/tree/master/device_commands/AD5541A+
   * **Xilinx Boards Common Drivers:** https://github.com/analogdevicesinc/no-OS/tree/master/platform_drivers/Xilinx/SDP_Common   * **Xilinx Boards Common Drivers:** https://github.com/analogdevicesinc/no-OS/tree/master/platform_drivers/Xilinx/SDP_Common
   * **EDK KC705 Reference project:** https://github.com/analogdevicesinc/fpgahdl_xilinx/tree/master/cf_sdp_kc705   * **EDK KC705 Reference project:** https://github.com/analogdevicesinc/fpgahdl_xilinx/tree/master/cf_sdp_kc705
Line 69: Line 68:
   * Connect the JTAG and UART cables to the KC705 and power up the FPGA board.   * Connect the JTAG and UART cables to the KC705 and power up the FPGA board.
  
-===== Quick start evaluation ===== +<WRAP round important 80%>
-For a quick start evaluation, run the **download.bat** script located in the **SDK/SDK_Workspace/bin** folder provided within the Reference Design Files.  This script uses XMD to program the FPGA with the HDL Reference Design and download the Software Reference Design into the DDR. +
- +
-<WRAP round info 80%>+
 \\ \\
-The **download.bat** script assumes that the Xilinx ISE Design Suite 14.6 is installed at this path: **C:/Xilinx/14.6**. If the installation path on your computer is different, please modify the script accordingly.+The EVAL-AD5542A evaluation board will be powered from PCs USB interface (LK8 position=A, LK9 position=B, LK7 position=B, LK3 position=A, LK2 position=A).
 </WRAP> </WRAP>
- 
-If programming was successful, you should be seeing the command messages appear on the terminal. 
 ===== Reference Project Overview ===== ===== Reference Project Overview =====
 The following commands were implemented in this version of EVAL-AD5541A reference project for Xilinx KC705 FPGA board. The following commands were implemented in this version of EVAL-AD5541A reference project for Xilinx KC705 FPGA board.
 ^ Command ^ Description ^ ^ Command ^ Description ^
 | **help?** | Displays all available commands. | | **help?** | Displays all available commands. |
-| **voltage=** | Sets the DAC output voltage. Accepted values:\\ 0 .. 2500 - desired output voltage in milivolts. | +| **register=** | Writes to the DAC register. Accepted values:\\ 0 .. 65535 - the value written to the DAC. |
-| **voltage?** |  Displays last written voltage value to the DAC. | +
-| **register=** | Writes to the DAC register. Accepted values:\\ 0 .. 65535 -  the value written to the DAC. |+
 | **register?** | Displays last written value in the DAC register. | | **register?** | Displays last written value in the DAC register. |
 +| **voltage=** | Sets the DAC output voltage. Accepted values:\\ 0 .. +2500 - desired output voltage in milivolts. |
 +| **voltage?** | Displays last written voltage value to the DAC. |
 +| **ldacPin=** | Sets the output value of LDAC pin. Accepted values:\\ 0 - sets LDAC pin low.(default)\\ 1 - sets LDAC pin high. |
 +| **ldacPin?** | Displays the value of LDAC pin. |
  
 Commands can be executed using a serial terminal connected to the UART peripheral of Xilinx KC705 FPGA. Commands can be executed using a serial terminal connected to the UART peripheral of Xilinx KC705 FPGA.
resources/fpga/xilinx/interposer/ad5541a.txt · Last modified: 09 Jan 2021 00:48 by Robin Getz

Page Tools