This is an old revision of the document!
The UTIL_EXTRACT IP allows the extraction of the trigger signal and restoration of the data signal that was embedded in the data stream by the AXI_ADC_TRIGGER IP.
| ||Number of channels||2|
| ||Data width. It assumes the trigger is in bit (n*16)-1, with n being the channel number||NUM_OF_CHANNELS * 16|
| || ||Clock input. Should be synchronous to the input and the output data|
| || ||Input data from the FIFO. Will replace each trigger bit with the sign extended version of the data. It should be data from the output of the variable fifo|
| || ||Data from which the trigger is extracted. It should be data from the input of the variable fifo|
| || ||Valid for the input data|
| || ||Data without the embedded trigger|
| || ||Trigger output. Is an logic OR of the triggers from all the channels that are captured simulaneously|