| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| resources:eval:user-guides:mykonos:quickstart [22 Nov 2017 16:57] – [Supported Environments] Michael Hennerich | resources:eval:user-guides:mykonos:quickstart [14 Jan 2021 05:24] (current) – use ez> interwiki links Robin Getz |
|---|
| |
| The Quick Start Guides provide a simple step by step instruction on how to do an initial system setup for the ADRV9371-N/PCBZ, ADRV9371-W/PCBZ boards on various FPGA development boards. They will discuss how to program the bitstream, run a no-OS program or boot a Linux distribution. | The Quick Start Guides provide a simple step by step instruction on how to do an initial system setup for the ADRV9371-N/PCBZ, ADRV9371-W/PCBZ boards on various FPGA development boards. They will discuss how to program the bitstream, run a no-OS program or boot a Linux distribution. |
| | |
| ==== Supported Carriers ==== | ==== Supported Carriers ==== |
| |
| The ADRV9371/PCBZ is, by definition a "FPGA mezzanine card" (FMC), that means it needs a carrier to plug into. The carriers we support are: | The ADRV9371/PCBZ is, by definition a "FPGA mezzanine card" (FMC), that means it needs a carrier to plug into. The carriers we support are: |
| |
| ^ Board ^ ADRV9371-N/PCBZ ^ ADRV9371-W/PCBZ ^ ADRV9375-N/PCBZ ^ ADRV9375-W/PCBZ ^ | ^ Board ^ ADRV9371-N/PCBZ ^ ADRV9371-W/PCBZ ^ ADRV9375-N/PCBZ ^ |
| | [[xilinx>ZCU102]] | √ | √ | √ | √ | | | [[xilinx>ZCU102]] | √ | √ | √ | |
| | [[xilinx>KC705]] | | | | | | | [[xilinx>KCU105]] | √ | √ | √ | |
| | [[xilinx>VC707]] | | | | | | | [[xilinx>ZC706]] | √ | √ | √ | |
| | [[xilinx>KCU105]] | | | | | | | [[https://www.altera.com/products/boards_and_kits/dev-kits/altera/arria-10-soc-development-kit.html | Arria 10 SoC]] | √ | √ | √ | |
| | [[xilinx>ZC706]] | √ | √ | √ | √ | | | [[https://www.altera.com/products/boards_and_kits/dev-kits/altera/kit-a10-gx-fpga.html | Arria 10 GX]] | √ | √ | √ | |
| | [[https://www.altera.com/products/boards_and_kits/dev-kits/altera/arria-10-soc-development-kit.html | Arria 10 SoC]] | √ | √ | √ | √ | | |
| |
| ==== Supported Environments ==== | ==== Supported Environments ==== |
| |
| ^ Board ^ HDL ^ Linux Software ^ No-OS Software ^ | ^ Board ^ HDL ^ Linux Software ^ No-OS Software ^ |
| | [[xilinx>ZCU102]] | √ | √ | | | | [[xilinx>ZCU102]] | √ | √ | √ | |
| | [[xilinx>KC705]] | | | | | | [[xilinx>KCU105]] | √ | √ | √ | |
| | [[xilinx>VC707]] | | | | | |
| | [[xilinx>KCU105]] | | | | | |
| | [[xilinx>ZC706]] | √ | √ | √ | | | [[xilinx>ZC706]] | √ | √ | √ | |
| | [[https://www.altera.com/products/boards_and_kits/dev-kits/altera/arria-10-soc-development-kit.html | Arria 10 SoC]] | √ | √ | | | [[https://www.altera.com/products/boards_and_kits/dev-kits/altera/arria-10-soc-development-kit.html | Arria 10 SoC]] | √ | √ | |
| | | [[https://www.altera.com/products/boards_and_kits/dev-kits/altera/kit-a10-gx-fpga.html | Arria 10 GX]] | √ | √ | √ | |
| | |
| |
| ==== Hardware Setup ==== | ==== Hardware Setup ==== |
| In most carriers, the ADRV9371/PCBZ board connects to the HPC connector (unless otherwise noted). The carrier setup requires power, UART (115200), ethernet (Linux), HDMI (if available) and/or JTAG (no-OS) connections. A few typical setups are shown below. | In most carriers, the ADRV9371/PCBZ board connects to the HPC connector (unless otherwise noted). The carrier setup requires power, UART (115200), ethernet (Linux), HDMI (if available) and/or JTAG (no-OS) connections. A few typical setups are shown below. |
| |
| | === ZC706 + ADRV9371/PCBZ === |
| |
| | {{ :resources:eval:user-guides:mykonos:mykonos_system_overview.png?800 |}} |
| |
| === ZC706 + ADRV9371/PCBZ === | === ZCU102 + ADRV9371/PCBZ === |
| |
| {{ :resources:eval:user-guides:mykonos:mykonos_system_overview.png?800 |}} | Connect ADRV9371 into HPC0 on your ZCU102. |
| |
| | === Unboxing guide === |
| | [[ez>cfs-file/__key/communityserver-discussions-components-files/703/AD9371-and-ADRV9009-setup-with-ZCU102-or-ZC706-April2019.pdf | Detailed unboxing guide]] |
| |
