This version (07 Dec 2022 14:52) was approved by Harshvardhan Bhatia.The Previously approved version (07 Dec 2022 14:52) is available.
EVAL-ADTF3175D-NXZ Initial Bring-up
Please go through the steps if you check both of the following conditions:
- You have an EVAL-ADTF3175D-NXZ kit as shown in the sticker below
- Your module serial number DOES NOT start with DV11
- Download the latest evaluation software package from here:
- Install the evaluation software
- At the end of the installation opt to download the micro-SD Card image.
If you missed this step, not go to the image folder to execute the script: get_image.cmd (Windows) or get_image.sh (Linux). - Unzip the downloaded archive to access the SD Card image and firmware binary.
- The micro-SD Card image will be named similarly to the following, microsd-54c2ce9f.zip.
- The firmware binary will be named similarly to fwUpdate_3.2.2.bin.
- Reflash the micro-SD Card included in your kit (for example microsd-54c2ce9f.zip) - SD card flashing guide
- Flash firmware (for example fwUpdate_3.2.2.bin) onto module - Link
- Run GUI as specified in startup guide - Link
resources/eval/user-guides/eval-adtf3175d-nxz-bringup.txt · Last modified: 07 Dec 2022 14:52 by Harshvardhan Bhatia