This version (12 Dec 2017 19:33) was approved by Brandon Bushey.
Tool Chain Guides
This chapter provides all the necessary steps to get the software environment up and running.
It contains four main sections:
- CrossCore Embedded Studio Download & Installation Guide - Provides all the necessary instructions on how to download and install CrossCore Embedded Studios Interactive Development Environment for ADICUP360 based on Eclipse.
- CrossCore Embedded Studio User Guide - Provides important information about using CrossCore Embedded Studio, such as, the process of importing, building, debugging, and creating user applications for the ADuCM360 microcontroller.
- Using EVAL-ADICUP360 with IAR and Keil IDEs - Provides detailed information how to use the EVAL-ADICUP360 board with IAR Embedded Workbench and Keil µVision.
- Hardware Drivers and USB Storage Drives - Provides detailed information how to use the EVAL-ADICUP360 board USB mass storage drives to load pre-compiled .BIN files or update the firmware on the debugger.
End of Document
resources/eval/user-guides/eval-adicup360/tools.txt · Last modified: 18 Sep 2017 17:41 by Brandon Bushey