This version (03 Sep 2018 07:36) was approved by Gowtham shanmugaraj.
Software Packs & Board Support Package
A modular software framework is provided for quick application prototyping. Based on the application use case, developers need to download the respective software packs.
There are no seperate toolchain,software packs and board support package for EV-COG-AD4050WZ, the toolchain,software packs and board support package for EV-COG-AD4050LZ works with EV-COG-AD4050WZ.The user needs to change only the pin muxing based on the application.For help regarding pinmapping refer to the Hardware Details section.
Please make sure you install either of the below toolchain before installing any of the below packs
- IAR Embedded Workbench for ARM 8.20.1 or higher
- CrossCore Embedded Studio 2.7.0 ® or higher
The Cog software development kit consists of the following packs:-
- Analog Devices ADuCM4x50 Device Support - This is a bare minimum pack required to enable working with ADuCM4050 and develop simple applications using the on-chip drivers.
- Version History
- Version: 3.1.0 - Extended support for IAR Embedded Workbench and Keil uVision. [Latest]
- Analog Devices EV-COG-AD4050 Off-Chip Drivers and Examples - This pack along with the DFP is required to develop applications using the on-board drivers.
- Version History
- Version 3.1.0 - Extended support for IAR Embedded Workbench.[Latest]
End Document
resources/eval/user-guides/ev-cog-ad4050w/packs_bsp.txt · Last modified: 03 Sep 2018 07:32 by Gowtham shanmugaraj