Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
| resources:eval:user-guides:ev-cog-ad4050lz:help_support [12 Aug 2017 09:27] – created Pranit Jadhav | resources:eval:user-guides:ev-cog-ad4050lz:help_support [03 Jan 2021 22:04] (current) – fix links Robin Getz | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== Help and Support ====== | ====== Help and Support ====== | ||
| + | |||
| + | <note >There are no seperate toolchain, | ||
| + | </ | ||
| Do you need help or have general support questions, than I hope this page helps you resolve those. | Do you need help or have general support questions, than I hope this page helps you resolve those. | ||
| Line 15: | Line 18: | ||
| - Program the EV-COG-AD4050LZ | - Program the EV-COG-AD4050LZ | ||
| * Sometimes a flashed program doesn' | * Sometimes a flashed program doesn' | ||
| - | * The first thing to try in this case, is to [[resources: | + | * The first thing to try in this case, is to [[resources: |
| * If drag and drop is not working, it may be necessary to erase the flash. To do so: | * If drag and drop is not working, it may be necessary to erase the flash. To do so: | ||
| - | - Download and install the CrossCore Serial Flash Programmer from here: [[http:// | + | - Download and install the CrossCore Serial Flash Programmer from here: [[adi>en/ |
| - Make sure that the USB is connected and on UART header (P8) 1 & 2 and 7 & 8 are shorted. | - Make sure that the USB is connected and on UART header (P8) 1 & 2 and 7 & 8 are shorted. | ||
| - Power cycle the EV-COG-AD4050LZ board while holding down the boot switch. | - Power cycle the EV-COG-AD4050LZ board while holding down the boot switch. | ||
| - Select the mbed serial COM port in the CrossCore Serial Flash Programmer, and erase the flash. | - Select the mbed serial COM port in the CrossCore Serial Flash Programmer, and erase the flash. | ||
| - | - Then try [[resources: | + | - Then try [[resources: |
| * If the mass erase didn't work, and you are trying to drag and drop a large .BIN file on EV-COG-AD4050LZ hardware, it's possible that the mbed interface file needs to be updated to support your application. | * If the mass erase didn't work, and you are trying to drag and drop a large .BIN file on EV-COG-AD4050LZ hardware, it's possible that the mbed interface file needs to be updated to support your application. | ||
| - | - Please visit the [[resources: | + | - Please visit the [[resources: |
| - | - Once you are in " | + | - Once you are in " |
| - Not receiving/ | - Not receiving/ | ||
| * Make sure that the UART header (P8) is positioned in the correct destination to transmit/ | * Make sure that the UART header (P8) is positioned in the correct destination to transmit/ | ||
| | | ||
| This is just a brief self-help guide to troubleshooting common issues. | This is just a brief self-help guide to troubleshooting common issues. | ||
| + | |||
| + | |||
| ===== Hardware, Software, and Documentation Questions ===== | ===== Hardware, Software, and Documentation Questions ===== | ||
| Line 59: | Line 64: | ||
| // End of Document // | // End of Document // | ||
| + | |||
| + | | ||
resources/eval/user-guides/ev-cog-ad4050lz/help_support.1502522869.txt.gz · Last modified: 12 Aug 2017 09:27 by Pranit Jadhav