This version is outdated by a newer approved version.
This version (12 Sep 2018 07:58) is a draft.
Approvals: 0/1
This version (12 Sep 2018 07:58) is a draft.Approvals: 0/1
This is an old revision of the document!
Table of Contents
MCU Cog Quick Start Guide
There are no seperate toolchain,On-Board Peripheral Drivers & Software for EV-COG-AD3029WZ, the toolchain,On-Board Peripheral Drivers & Software for EV-COG-AD3029LZ works with EV-COG-AD3029WZ.The user needs to change only the pin muxing based on the application.For help regarding pinmapping refer to the Hardware Details section.
Setting up EV-COG-AD3029WZ is a three step process.
- IDE Setup
- Software Packs & Drivers Setup
- Running an Example Project
EV-COG-AD4050LZ can be used with following Toolchains. Please see below links for the quickstart guide with respect to different IDEs.
CrossCore Embedded Studio
Click below link to go to CrossCore Embedded Studio userguide.
IAR Embedded Workbench for ARM
Click below link to go to CrossCore Embedded Studio userguide.
Keil uVision IDE
Click below link to go to Keil uVision IDE userguide.
[[resources:eval:user-guides:ev-cog-ad3029wz:tools:other_ide|EV-COG-AD3029WZ Keil uVision IDE ]]\\
End Document
resources/eval/user-guides/ev-cog-ad3029wz/quickstart_1.1536731881.txt.gz · Last modified: 12 Sep 2018 07:58 by Gowtham shanmugaraj