The most recent version of this page is a draft.
This version is outdated by a newer approved version.This version (20 Sep 2017 05:07) is a draft.
Approvals: 0/1
This version is outdated by a newer approved version.This version (20 Sep 2017 05:07) is a draft.Approvals: 0/1
This is an old revision of the document!
Table of Contents
CN0254 Evaluation Board Guide
Overview
CN0254 is a cost effective, highly integrated 16-bit, 250 kSPS, 8-channel data acquisition system that can digitize ±10 V industrial level signals. The circuit also provides 2500 V rms isolation between the measurement circuit and the host controller, and the entire circuit is powered from a single isolated PWM controlled 5 V supply.
The EVAL-CN0254-SDPZ board connects to ADI’s System Demonstration Platform (SDP) and is powered by a triple output DC power supply of +15 V, -15 V and 6 V.
Required Equipment
- EVAL-SDP-CB1Z Controller Board (SDP-B Board)
- DC Power Supply (6 V, 500 mA)
- PC with the following Minimum Requirements
- Windows® XP, Windows Vista (32-bit), or Windows 7 (32-bit)
- USB interface
General Setup
resources/eval/user-guides/circuits-from-the-lab/cn0254.1505876860.txt.gz · Last modified: 20 Sep 2017 05:07 by Trisha Cabildo