Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
resources:eval:user-guides:circuits-from-the-lab:cn0204 [07 Aug 2017 08:35] Angelo Nikko Catapangresources:eval:user-guides:circuits-from-the-lab:cn0204 [30 Jul 2021 07:20] (current) Victor Calinao, Jr
Line 21: Line 21:
   * ±25 V/1 A Triple Output DC Power Supply (**Agilent E3631A**)   * ±25 V/1 A Triple Output DC Power Supply (**Agilent E3631A**)
   * Optional Digital Multimeter for Verification (**Agilent 34401A 6.5 Digital Multimeter**)   * Optional Digital Multimeter for Verification (**Agilent 34401A 6.5 Digital Multimeter**)
-  * PC (Windows 2000 or Windows XP) with USB interface+  * PC with USB interface 
 +      * Windows 7 or higher
  
 ---- ----
Line 36: Line 37:
       * Connect the **-25 V** power supply to the **GND_ISO** terminal       * Connect the **-25 V** power supply to the **GND_ISO** terminal
   * Terminal block **CN4** is the voltage output   * Terminal block **CN4** is the voltage output
-      * **Optionally**, the [[ADI>5751]] output voltage feedback can be configured by connecting **VSENSE+** to a selected node in the load circuit+      * **Optionally** if **JP3** is open, the output voltage feedback can be configured by connecting **VSENSE+** to a selected node in the load circuit
 <WRAP center round important 60%>Power on the **(EVAL-CN0204-SDPZ)** through the triple output power supply and the **(SDP-B Board)** through the PC **SEPARATELY** before connecting the two boards together.</WRAP> <WRAP center round important 60%>Power on the **(EVAL-CN0204-SDPZ)** through the triple output power supply and the **(SDP-B Board)** through the PC **SEPARATELY** before connecting the two boards together.</WRAP>
  
 ==== Jumper Settings ==== ==== Jumper Settings ====
-See the table in the image below for the jumper settings. Values in bold are the default settings for the [[ADI>CN0204|EVAL-CN0204-SDPZ]].+See the table in the image below for the jumper settings. Values in red are the default settings for the [[ADI>CN0204|EVAL-CN0204-SDPZ]].
  
-{{ :resources:eval:user-guides:circuits-from-the-lab:cn0204:cn0204_table2.jpg?nolink&600 |}}+{{ :resources:eval:user-guides:circuits-from-the-lab:cn0204:cn0204_table2_5.jpg?nolink&600 |}}
  
 ---- ----
Line 110: Line 111:
   * [[ADI>AD5662|AD5662 Product Page]]   * [[ADI>AD5662|AD5662 Product Page]]
   * [[ADI>AD5751|AD5751 Product Page]]   * [[ADI>AD5751|AD5751 Product Page]]
 +
 +
 +===== Schematic, PCB Layout, Bill of Materials =====
 +
 +<WRAP round 80% download>
 +[[adi>media/en/reference-design-documentation/design-integration-files/CN0204-DesignSupport.zip|EVAL-CN0204-SDPZ Design & Integration Files]]
 +  * Schematics 
 +  * PCB Layout 
 +  * Bill of Materials 
 +  * PADS project
 +</WRAP>
 +
 +=====Registration===== 
 +<WRAP round tip 80% >
 +Receive software update notifications, documentation updates, view the latest videos, and more when you register your hardware.  [[reg>EVAL-CN0204-SDPZ?&v=Rev B|Register]] to receive all these great benefits and more!</WRAP>
 +
 +//End of Document//
resources/eval/user-guides/circuits-from-the-lab/cn0204.1502087707.txt.gz · Last modified: 07 Aug 2017 08:35 by Angelo Nikko Catapang