This version (26 Feb 2016 09:00) was approved by Mihai Ionut Suciu.The Previously approved version (06 Feb 2016 16:02) is available.
Table of Contents
AD-PZSDR2400TDD-EB Functional Overview
A functional block diagram of the system is given below. The system consists of two transmit paths, two receive paths and power supply.
Transmit
Key component:
| ADL5324 | The ADL5324 incorporates a dynamically adjustable biasing circuit that allows for the customization of OIP3 and P1dB performance from 3.3 V to 5 V, without the need for an external bias resistor. |
| HMC921 | The HMC921LP4E is a high linearity GaAs HBT MMI C 2watt power amplifier operating from 0.4 to 2.7 GHz and is housed in a RoHS compliant 4×4 mm QFN leadless package. |
Receive
Key component:
| HMC669 | The HMC669LP3(E) is a versatile, high dynamic range GaAs MMIC Low Noise Amplifier that integrates a low loss LNA bypass mode on the IC. The amplifier is ideal for receivers and LNA modules operating between 1.7 and 2.2 GHz and provides 1.4 dB noise figure, 17 dB of gain and +29 dBm IP3 from a single supply of +5V @ 86mA. |
Switching
Key component:
| HMC546 | The HMC546LP2(E) is a failsafe SPDT switch in a leadless DFN surface mount plastic package for use in transmit-receive, and LNA protection applications which require very low distortion and high power handling of up to 10 watts. The device can control signals from 200 - 2700 MHz* and is especially suited for WiMAX and WiBro repeaters, PMR and automotive telematic applications |
Power
Key components:
| ADP2384 | 4A, 20V step-down switcher. |
| ADP7104 | High accuracy, 500mA LDO. |
| ADM7171 | Ultra low noise, 1 A LDO. |
The board receives all the power from the carrier board through a 40 pin connector.
Navigation - AD-PZSDR2400TDD-EB
Up: HardwareNext.: Configuration Options
resources/eval/user-guides/ad-pzsdr2400tdd-eb/hardware/functional_overview.txt · Last modified: 26 Feb 2016 09:00 by Mihai Ionut Suciu