Differences

This shows you the differences between two versions of the page.

--- resources:eval:user-guides:ad-fmcomms5-ebz:hardware:configuration_options [14 Oct 2014 21:50] – created Wyatt Taylor
+++ resources:eval:user-guides:ad-fmcomms5-ebz:hardware:configuration_options [02 Dec 2014 20:12] – [External Clock] - fix typo Robin Getz
@@ Line 21: / Line 21: @@
 ===== External Clock =====
-By default the FMComms5 uses a Rakon 40MHz RX03225M as the reference clock. This is driven into the ADCLK846, which distributes the clock to the two AD9361s, the ADF5355, as well as back to the FMC connector. It is important that the PCB trace lengths to the two AD9361s be equally matched.
+By default the FMComms5 uses a Rakon 40MHz RXO3225M as the reference clock. This is driven into the ADCLK846, which distributes the clock to the two AD9361s, the ADF5355, as well as back to the FMC connector. It is important that the PCB trace lengths to the two AD9361s be equally matched.
 This on board reference can be bypassed by placing C301 and removing R360. In this configuration an external reference clock can be injected into J301. The level of the external reference should be ensured to not exceed the ADCLK846 input conditions, and it will still be used to distribute the reference clock to the two AD9361s.

Wiki