This version is outdated by a newer approved version.
This version (11 Dec 2018 09:07) was approved by Martin Murnane.The Previously approved version (11 Dec 2018 09:06) is available.
This version (11 Dec 2018 09:07) was approved by Martin Murnane.The Previously approved version (11 Dec 2018 09:06) is available.This is an old revision of the document!
Table of Contents
30kW SiC Bidirectional Charger
Features
- 3- Phase Interleaved Bidirectional charging
- Buck mode in both directions
- Boost mode in both directions
- Typical efficiency - 98%
- ADSP-CM419 Control Processor
- Half Bridge Topology with SiC Power Switchs
- 1200V, 50A, 80kHz switching
- Synchronous and Asynchronous Switching
Products
Documentation
Block Diagram
Product Details
The DC-DC Charger is a bidirectional charger for industrial applications. it can chage to 30KW typical power levels, with a 1000V Dc Link voltage to a battery voltage of 750V. Charging current can be up to 100A typically or 150A maximum. An efficiency of 98% can be expected with SiC power switch's, with a minimum efficiency at full load (35ºC) of 97%.
Safety Notice
SAFETY NOTICE - This is a high Voltage Board 1000V. Only qualified person to test this device in a suitable Lab environment.
resources/eval/eval-dcdc-charger.1544515660.txt.gz · Last modified: 11 Dec 2018 09:07 by Martin Murnane