Differences

This shows you the differences between two versions of the page.

--- resources:eval:developer-kits:2to24ghz-mxfe-rf-front-end:layout-mockup [21 Jul 2022 16:33] – added description David Brown
+++ resources:eval:developer-kits:2to24ghz-mxfe-rf-front-end:layout-mockup [11 Apr 2023 17:57] (current) – Updated Chance Fletcher
@@ Line 1: / Line 1: @@
-======Size Estimate & Layout Mock-Up======
+[[:resources:eval:developer-kits:2to24ghz-mxfe-rf-front-end | Link to parent page]]
-The example layout below provides an effective size estimate for the Rx downconverter and Tx upconverter RF signal chains. The Rx signal chain itself requires roughly 4.3 x 1.2in (110 x 30mm) in area using common RF PCB layout practices, and can likely be optimized to fit in a smaller surface area depending on system size constraints. The Tx signal chain requires roughly 4.3 x 0.9in (110 x 23mm) and likewise leaves room for modification & optimization.
+======Size Estimate======
+The example layout below provides an effective size estimate for the RF front end. The total PCB measures 5 x 2in (127 x 50.8mm). Information regarding the different channels or circuits size requirements are highlighted below:
+  - Rx ch = 4.00 sq. in
+  - Tx ch = 3.53 sq. in
+  - Digitizer + clk = 4.00 sq. in
+  - RF PSN = 0.88 sq. in
+  - Digitizer PSN = 2.56 sq. in
+  - Fixed LO = 1.13 sq. in
+  - Tunable LO = 3.90 sq. in
 \\
 \\
-{{ :resources:eval:developer-kits:2to24ghz-mxfe-rf-front-end:3d_layout_mockup.jpg?900 |}}
+{{ :resources:eval:developer-kits:2to24ghz-mxfe-rf-front-end:layoutstudy.jpg?900 |}}

Wiki

Analog Devices Wiki

Differences

Analog Devices Wiki

Differences

Page Tools