This version (24 Jan 2023 20:08) was approved by Brad Hall.The Previously approved version (21 Jul 2022 16:36) is available.Diff

Link to parent page

Size Estimate

The example layout below provides an effective size estimate for the Rx downconverter and Tx upconverter RF signal chains. The Rx signal chain itself requires roughly 4.3 x 1.2in (110 x 30mm) in area using common RF PCB layout practices, and can likely be optimized to fit in a smaller surface area depending on system size constraints. The Tx signal chain requires roughly 4.3 x 0.9in (110 x 23mm) and likewise leaves room for modification & optimization.

resources/eval/developer-kits/2to24ghz-mxfe-rf-front-end/layout-mockup.txt · Last modified: 24 Jan 2023 20:08 by Brad Hall