This version is outdated by a newer approved version.
This version (27 Jan 2021 23:04) was approved by Robin Getz.The Previously approved version (26 Nov 2018 16:32) is available.
This version (27 Jan 2021 23:04) was approved by Robin Getz.The Previously approved version (26 Nov 2018 16:32) is available.This is an old revision of the document!
ADALM-PLUTO Detailed Specifications
Features List:
-
- 1 Transmit, 1 Receive channel (with separate tuning frequencies)
- Tuning range: 325 MHz - 3.8 GHz
- 2.4 Hz LO step size
- Tunable channel bandwidth: 200 kHz - 20 MHz
- Integrated 12-bit DACs (Tx) and ADCs (Rx)
- Variable output data rates: 61.44 MSPS - 65.1 kSPS
- Modulation Accuracy (EVM): ≤−40 dB (typical, not measured on every unit)
- Internal I/Q correction and calibration
- Tx to Rx Isolation:
- Tx Specifications
- Maximum Output Power:
- Rx Specifications
- Min sensitivity:
- RX gain control: 0 to +74.5dB (800 MHz)
- Manual Modes
- Slow Attack
- Fast Attack
- Received Signal Strength Indicator: 100 dB (±2 dB)
- Xilinx Zynq XC7Z010-1CLG225C
- FPGA
- Logic Cells: 28k
- Block RAM: 2.1Mb
- DSP Slices 80
- ARM Processing System
- Single-core ARM® Cortex™-A9 MPCore™
- 667 MHz
- USB 2.0 (included in the Zynq)
- streams up to 4MSPS with no dropped samples
- Memory
- Micron DDR3L
- 1066 Mbps (16-bit interface)
- 512 MBytes
- Micron Serial Flash
- 32 Mbyte
- Quad I/O provides throughput up to 54 MBps
- Minimum 100,000 ERASE cycles (don't update the firmware more times than this)
- Power
- Completely self powered from USB
- Optional power connector
university/tools/pluto/devs/specs.1611785042.txt.gz · Last modified: 27 Jan 2021 23:04 by Robin Getz