Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
university:courses:electronics:labs [19 Jul 2017 15:21] – add PV lab Doug Merceruniversity:courses:electronics:labs [09 Oct 2017 17:15] – [ADALM2000 Based Lab Activity Material, Electronics I and II] Doug Mercer
Line 5: Line 5:
 The laboratory activities provided on this wiki are considered open source and available for free use in non-commercial educational and academic settings. **The only requirement is that they continue to retain the attribution to Analog Devices Inc.** Supplying them on the ADI wiki allows registered users to contribute to the materials posted here improving the content and keeping them up to date.  The laboratory activities provided on this wiki are considered open source and available for free use in non-commercial educational and academic settings. **The only requirement is that they continue to retain the attribution to Analog Devices Inc.** Supplying them on the ADI wiki allows registered users to contribute to the materials posted here improving the content and keeping them up to date. 
  
-In general these labs can be performed using the [[university:tools:m2k|ADALM2000]] Active Learning Module and [[university:tools:m2k:scopy|Scopy]] software with just the components provided in the [[adi>ADALP2000]] Analog Parts Kit, however additional devices are sometimes needed. Other sources of components can of course be used and there is additional information on that further down on this page. If you are looking for Lab Activity material written for use with the [[university:courses:alm1k:alm-labs-list|ADALM1000 look here]].+In general these labs can be performed using the [[university:tools:m2k|ADALM2000]] (M2K) Active Learning Module and [[university:tools:m2k:scopy|Scopy]] software. It is also possible to perform these lab activities using the ADALM1000 (M1K) hardware module with minor adjustments to the circuits. [[university:courses:alm1k:m2k-convert-labs|This document]] outlines how the labs might be altered for use with M1K and the ALICE desktop software. 
 + 
 +They are generally written to be performed with just the components provided in the [[adi>ADALP2000]] Analog Parts Kit, however additional devices are sometimes needed. Other sources of components can of course be used and there is additional information on that further down on this page. If you are looking for Lab Activity material written specifically for use with the [[university:courses:alm1k:alm-labs-list|ADALM1000 look here]].
  
 ===Pre-Lab Circuit Simulation=== ===Pre-Lab Circuit Simulation===
university/courses/electronics/labs.txt · Last modified: 01 Nov 2021 18:20 by Mark Thoren

Page Tools