Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
university:courses:electronics:labs [28 Jun 2018 16:32] – [Power Management Circuits] add Buck Converter Basics Antoniu Miclausuniversity:courses:electronics:labs [31 Oct 2018 12:25] – add m2k connections for ltspice Antoniu Miclaus
Line 7: Line 7:
 In general these labs can be performed using the [[university:tools:m2k|ADALM2000]] (M2K) Active Learning Module and [[university:tools:m2k:scopy|Scopy]] software. It is also possible to perform these lab activities using the ADALM1000 (M1K) hardware module with minor adjustments to the circuits. [[university:courses:alm1k:m2k-convert-labs|This document]] outlines how the labs might be altered for use with M1K and the ALICE desktop software. In general these labs can be performed using the [[university:tools:m2k|ADALM2000]] (M2K) Active Learning Module and [[university:tools:m2k:scopy|Scopy]] software. It is also possible to perform these lab activities using the ADALM1000 (M1K) hardware module with minor adjustments to the circuits. [[university:courses:alm1k:m2k-convert-labs|This document]] outlines how the labs might be altered for use with M1K and the ALICE desktop software.
  
-They are generally written to be performed with just the components provided in the [[adi>ADALP2000]] Analog Parts Kit, however additional devices are sometimes needed. Other sources of components can of course be used and there is additional information on that further down on this page. If you are looking for Lab Activity material written specifically for use with the [[university:courses:alm1k:alm-labs-list|ADALM1000 look here]].+They are generally written to be performed with just the components provided in the [[university:tools:adalp2000:parts-index|ADALP2000]] Analog Parts Kit, however additional devices are sometimes needed. Other sources of components can of course be used and there is additional information on that further down on this page. If you are looking for Lab Activity material written specifically for use with the [[university:courses:alm1k:alm-labs-list|ADALM1000 look here]]. 
 + 
 +Most of the labs are populated with [[https://www.analog.com/en/design-center/design-tools-and-calculators/ltspice-simulator.html | LTSpice]] resource files which contain the schematics of the circuits discussed at a specific topic. An file containing the ADALM2000 connections for the schematics can be found here: [[https://minhaskamal.github.io/DownGit/#/home?url=https://github.com/analogdevicesinc/education_tools/tree/master/m2k/ltspice/m2k_conn_ltspice | m2k_conn_ltspice]].
  
 ====Pre-Lab Circuit Simulation==== ====Pre-Lab Circuit Simulation====
university/courses/electronics/labs.txt · Last modified: 01 Nov 2021 18:20 by Mark Thoren

Page Tools