Differences

This shows you the differences between two versions of the page.

--- university:courses:electronics:electronics-lab-led-sensor [27 Mar 2017 16:46] – [Materials:] Doug Mercer
+++ university:courses:electronics:electronics-lab-led-sensor [27 Mar 2017 16:51] – [Hardware Setup:] Doug Mercer
@@ Line 31: / Line 31: @@
 =====Hardware Setup:=====
-Use the fixed +5 V power supply from the Discovery module to power your circuit. Use scope channel 1 to monitor the voltage at the collector node of Q<sub>1</sub>.
+Use the variable positive power supply from the ADALM2000 module set to +5 V to power your circuit. Use scope channel 1 to monitor the voltage at the collector node of Q<sub>1</sub>.
 =====Procedure:=====

Wiki