Differences

This shows you the differences between two versions of the page.

--- university:courses:electronics:electronics-lab-breadboard-coupling [12 Apr 2017 12:40] – rename Antoniu Miclaus
+++ university:courses:electronics:electronics-lab-breadboard-coupling [24 Jul 2017 14:58] – change amplitude value to peak-peak Antoniu Miclaus
@@ Line 48: / Line 48: @@
 ===== Hardware Setup: =====
-Using the Network Analyzer instrument in the Scopy software obtain a gain (attenuation) vs. frequency plot from 10 Hz to 10 MHz. Scope channel 1 is the "filter" input and scope channel 2 is the "filter" output. Set AWG offset to 0 and the Amplitude to 1V with the Max-Gain set to 0.1X. Set the vertical scale to start at 1dB with an 80 dB range. Run a single sweep and export the data to a .csv file.
+Using the Network Analyzer instrument in the Scopy software obtain a gain (attenuation) vs. frequency plot from 10 Hz to 10 MHz. Scope channel 1 is the "filter" input and scope channel 2 is the "filter" output. Set AWG offset to 0 and the Amplitude to 2V with the Max-Gain set to 0.1X. Set the vertical scale to start at 1dB with an 80 dB range. Run a single sweep and export the data to a .csv file.
 ===== Procedure: =====

Wiki