Differences

This shows you the differences between two versions of the page.

--- university:courses:electronics:electronics-lab-7 [05 Mar 2019 12:23] – [Procedure:] Antoniu Miclaus
+++ university:courses:electronics:electronics-lab-7 [25 Jun 2020 22:07] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-====== Activity 7. Zero gain amplifier (BJT) ======
+====== Activity: Zero gain amplifier (BJT) ======
 ===== Objective: =====
@@ Line 25: / Line 25: @@
 ===== Hardware Setup: =====
-The waveform generator 1 should be configured for a 1 KHz triangle wave with 3 volt amplitude and 1.5V offset. Connect scope Channel 1 to display output W1 of the AWG generator. The Single ended input of scope channel 2 (2+) is used to measure alternately the base and collector voltage of Q<sub>1</sub>.
+The waveform generator 1 should be configured for a 1 KHz triangle wave with 3 volt amplitude peak-to-peak and 1.5V offset. Connect scope Channel 1 to display output W1 of the AWG generator. The Single ended input of scope channel 2 (2+) is used to measure alternately the base and collector voltage of Q<sub>1</sub>.
 {{:university:courses:electronics:zero_gain-bb.png|}}
@@ Line 85: / Line 85: @@
-The waveform generator should be configured for a 1 KHz triangle wave with 3 volt amplitude and 1.5V offset. Both scope channels can be set to 200mV per division.
+The waveform generator should be configured for a 1 KHz triangle wave with 3 volt amplitude peak-to-peak and 1.5V offset. Both scope channels can be set to 200mV per division.
 ===== Procedure: =====
@@ Line 124: / Line 124: @@
 <WRAP centeralign> Figure 12 V<sub>BE</sub> Multiplier Breadboard circuit </WRAP>
-The waveform generator should be configured for a 1KHz triangle wave with 3 volt amplitude and 1.5V offset. Both scope channels can be set to 200mV per division.
+The waveform generator should be configured for a 1KHz triangle wave with 3 volt amplitude peak-to-peak and 1.5V offset. Both scope channels can be set to 200mV per division.
 ===== Procedure: =====
@@ Line 173: / Line 173: @@
 <WRAP centeralign> Figure 18 Version 3 of V<sub>BE</sub> multiplier Breadboard Circuit</WRAP>
-The waveform generator should be configured for a 1KHz triangle wave with 3 volt amplitude and 1.5V offset. Both scope channels can be set to 200mV per division.
+The waveform generator should be configured for a 1KHz triangle wave with 3 volt amplitude peak-to-peak and 1.5V offset. Both scope channels can be set to 200mV per division.
 ===== Procedure: =====
@@ Line 209: / Line 209: @@
 <WRAP round download>
 **Resources:**
-  * Fritzing files: [[ https://minhaskamal.github.io/DownGit/#/home?url=https://github.com/analogdevicesinc/education_tools/tree/master/m2k/fritzing/bjt_zero_gain_amp_bb | bjt_zero_gain_amp_bb]]
+  * Fritzing files: [[downgit>education_tools/tree/master/m2k/fritzing/bjt_zero_gain_amp_bb | bjt_zero_gain_amp_bb]]
-  * LTspice files: [[ https://minhaskamal.github.io/DownGit/#/home?url=https://github.com/analogdevicesinc/education_tools/tree/master/m2k/ltspice/bjt_zero_gain_amp_ltspice | bjt_zero_gain_amp_ltspice]]
+  * LTspice files: [[downgit>education_tools/tree/master/m2k/ltspice/bjt_zero_gain_amp_ltspice | bjt_zero_gain_amp_ltspice]]
 </WRAP>
 **Return to Lab Activity [[university:courses:electronics:labs|Table of Contents]]**

Wiki

Analog Devices Wiki

Differences

Analog Devices Wiki

Differences

Page Tools