Differences

This shows you the differences between two versions of the page.

--- university:courses:electronics:electronics-lab-28 [17 Jan 2021 19:47] – [For Further reading:] Doug Mercer
+++ university:courses:electronics:electronics-lab-28 [14 Jun 2022 14:11] (current) – [Making inverters with the CD4007 transistor array] Doug Mercer
@@ Line 1: / Line 1: @@
-====== Build CMOS Logic Functions Using CD4007 Array ======
+====== Build CMOS Logic Functions Using CD4007 Array - ADALM2000======
 ===== Objective: =====
@@ Line 9: / Line 9: @@
 Below in figure 1 is the schematic and pinout for the CD4007:
-{{ :university:courses:electronics:cd4007.png?350 |}}
+{{ :university:courses:alm1k:cd4007_pinout.png?400 |}}
 <WRAP centeralign> Figure 1 CD4007 CMOS transistor array pinout </WRAP>
@@ Line 39: / Line 39: @@
 ===== Hardware Setup: =====
-Configure the waveform generator for a 1 KHz triangle wave with 5V amplitude peak-to-peak and 2.5V offset. Both scope channels should be set to 1V/Div. Configure the scope in XY mode with channel 1 on the horizontal axis and channel 2 on the vertical axis.
+Configure the waveform generator for a 100 Hz triangle wave with 5V amplitude peak-to-peak and 2.5V offset. Both scope channels should be set to 1V/Div. Configure the scope in XY mode with channel 1 on the horizontal axis and channel 2 on the vertical axis.
 {{ :university:courses:electronics:a28_f3bb.JPG? |}}

Wiki