Differences

This shows you the differences between two versions of the page.

--- university:courses:electronics:electronics-lab-21 [12 Jul 2019 14:01] – Pop Andreea
+++ university:courses:electronics:electronics-lab-21 [23 Aug 2019 13:58] – Antoniu Miclaus
@@ Line 40: / Line 40: @@
 ===== Hardware Setup: =====
-Configure the waveform generator for a 1 KHz triangle wave with 4V amplitude and 2.5V offset. Both scope channels should be set to 1V/Div.
+Configure the waveform generator for a 1 KHz triangle wave with 4V amplitude peak-to-peak and 2.5V offset. Both scope channels should be set to 1V/Div.
 ===== Procedure: =====
@@ Line 56: / Line 56: @@
 ===== Hardware Setup: =====
-Configure the Network (Bode) analyzer for 2 log decades, end frequency of 100 KHz, a max gain of 2X, run time of 10 sec, offset of 0 V and an amplitude of 2 V. Run a single sweep and save the data to a file.
+Configure the Network (Bode) analyzer for 2 log decades, end frequency of 100 KHz, a max gain of 2X, run time of 10 sec, offset of 0 V and an amplitude of 2 V peak-to-peak. Run a single sweep and save the data to a file.
 =====Question: =====

Wiki