Differences

This shows you the differences between two versions of the page.

--- university:courses:electronics:electronics-lab-15 [28 Jun 2017 02:26] – [Procedure:] Doug Mercer
+++ university:courses:electronics:electronics-lab-15 [12 Jul 2019 14:15] – Pop Andreea
@@ Line 1: / Line 1: @@
-====== Activity 15. DC-DC Converters I ======
+====== Activity: DC-DC Converters I ======
 ===== Objective: =====
@@ Line 103: / Line 103: @@
 ===== Hardware Setup: =====
-The waveform generator should be configured for DC output and 2.5V offset. The digital clock output should be configured for a 50% duty cycle and 100 KHz output frequency. The Single ended input of scope channel 1 (1+) is used to measure the output of the analog voltage comparator.
+The signal generator should be configured for constant DC output of 2.5V. The digital clock output should be configured for a 50% duty cycle and 100 KHz output frequency. The Single ended input of scope channel 1 (1+) is used to measure the output of the analog voltage comparator.
 ===== Procedure: =====

Wiki