You can find the results of your wiki search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate button, or search the rest of Analog.com. If that doesn't work, try Google.
es:tools-software/linux-software/kuiper-linux |AD-FMC-SDCARD for Zynq & Altera SoC Quick Start Guide]]
... wiki/common#esd_warning&nofooter&noheader}}
==== FMC Pin Connection Configuration Change ====
<WRAP c... on of the Arria10 SoC Development Kit some of the FMC header pins are connected to a dedicated clock ch... of the Arria10 SoC Development Kit underneath the FMC A connector (J29).
The following picture shows t
ith <fc #ff0000>**VADJ set to 1.8V**</fc> and the FMC connector on the carrier (ZC706, Zedborad) is map... an ADRV9002 Card, there is a red LED close to the FMC connector. The role of this LED is to indicate if... CBZ]] or [[adi>EVAL-ADRV9002|ADRV9002NP/W2/PCBZ]] FMC board to the FPGA carrier //**LPC FMC**// socket.
* On the FMC card set switch to select clock sourc
an ADRV9002 Card, there is a red LED close to the FMC connector. The role of this LED is to indicate if... CBZ]] or [[adi>EVAL-ADRV9002|ADRV9002NP/W2/PCBZ]] FMC board to the FPGA carrier socket.
* On the FMC card set switch to select clock source between:
*... ''sudo shutdown -h now''
{{:resources:fpga:xilinx:fmc:ad-fmcomms1-ebz:shutdown.png?300|}}
</WRAP>
====
PCBZ]] is, by definition a "FPGA mezzanine card" (FMC), that means it needs a carrier to plug into. The... ration ====
On the ZC706 / ZedBoard platforms the FMC connectors map to HR IO banks. The HR banks have